Pneumatic Dot Peen Marking Machine
Introduction
Pneumatic marking machine allows smooth and efficient marking of materials. The controlled and compressed air pressure ensures consistent and accurate marking even on challenging surfaces like uneven or curved surfaces.
Technical Specification
| Product number | Pneumatic Dot Peen Marking Machine | |
| operating system | POWER MARK (machine with system computer) | |
| software system | Latest industrial mark engraving system, Chinese and English interface switch Higher precision and faster speed | |
| Print content | Various characters, serial number, VIN code and graphics anti-counterfeiting marks | |
| Support bar code | External bar code machine, printing bar code | |
| print range | 170x110 mm (available upon request) | |
| Rotation upgrade | Can be external rotating clamture, arc marking | |
| Repeat print accuracy | 0.05 mm | |
| Print depth | Adjustable at 0.02-0.5 mm (depending on the material) | |
| Hardness of workpiece | HRC60 | |
| print out rate | Up to 2 characters per second (2mm word high letter or number) | |
| Print direction | Optional upper, lower, left, right, and pipe arc surface, fan shape | |
| Applicable artifacts | Various materials, shapes, and sizes | |
| input mode | Manual and automatic serial number increment (the increment number can be set) | |
| Voltage/power | 220V/110V 50Hz ± 10% about 100 W | |
| bleed pressure | >=0.6 Mpa (practical use 0.2-0.5 Mpa) | |
| working temperature | 5-45 Degrees | |
| impacting frequency | Greater than 200 Hz | |
| Special application | Large quantities and high requirements, suitable for production line automation integration | |
